Ari Armaturen Control Valve

ARI ARMATUREN
CONTROL VALVE
ARI PRESO

Supplier Ari Armaturen Preso

Ari Armaturen Control Valve

Pressure Regulating Valve

The information complies to the Pressure Equipment Directive 2014/68/EU. It is the responsibility of the machine planner to ensure.

Ari Armaturen Features :
  • Spring loaded
  • Regulating plug
  • Compact design
  • Shaft plug guide
  • Maintenance-free
  • Standard bellows seal
  • Exact and easy adjustment
Other Ari Armaturen  :
Figure12753
Pressure NominalPN 16
Diameter NominalDN 15
Temperature-10°C up to 350°C
MaterialEN-JL1040

Ari Armaturen Control Valve

Temperature Controller

The information complies to the Pressure Equipment Directive 2014/68/EU. It is the responsibility of the machine planner to ensure compliance control valve.

Ari Armaturen Features :
  • Sensor pocket
  • Manual control device
  • Setting range is adjustable
  • Exact and easy adjustment
  • Over-temperature safety device
  • Reliable, low maintenance operation
Ari Armaturen Series :
Figure12771
Pressure NominalPN 16
Diameter NominalDN 15
Temperature-10°C up to 300°C
MaterialEN-JL1040

ARI ARMATUREN
CONTROL VALVE
ARI TEMPTROL

Supplier Ari Armaturen Temptrol

Ari Armaturen Control Valve

Temperature Controller

The information complies to the Pressure Equipment Directive 2014/68/EU. It is the responsibility of the machine planner to ensure compliance control valve.

Ari Armaturen Features :
  • Sensor pocket
  • Manual control device
  • Setting range is adjustable
  • Exact and easy adjustment
  • Over-temperature safety device
  • Reliable, low maintenance operation
Ari Armaturen Series :
Figure12771
Pressure NominalPN 16
Diameter NominalDN 15
Temperature-10°C up to 300°C
MaterialEN-JL1040

ARI ARMATUREN
CONTROL VALVE
ARI TEMPTROL

Supplier Ari Armaturen Temptrol

ARI ARMATUREN
CONTROL VALVE
ARI STEVI H

Supplier Ari Armaturen Stevi H

Ari Armaturen Control Valve

Control Valve For Heating

Control valve are supplied complete with actuator fitted. It is not permitted to mantle / dismantle actuators with valve operating at service conditions (temperature and pressure).

Ari Armaturen Features :
  • Spare part drawings
  • Operating instructions
  • Settings with over pressure
  • Complete with actuator fitted
  • pressure temperature diagram
  • CAD symbols and tender specifications
Ari Armaturen Series :
Figure10485
Pressure NominalPN 6
Diameter NominalDN 15
Temperature-10°C up to 130°C
MaterialEN-JL1040

Ari Armaturen Control Valve

Electric Actuators Ari Premio

Actuating or shut-off valve are operated with the ARI-PACO linear actuators which have a linear nominal path of up to 20 mm and require a thrust force of 0,85 kN.

Ari Armaturen Features :
  • Handwheel
  • Enclosure IP 54
  • Travel indicator
  • Torque-dependent switching off
  • Require a thrust force of 0,85 kN
  • Operative ambient temp 0°C to +50°C
 Other Ari Armaturen :
TypePremio 12kN
Voltage115 V
Temperature Rating-20°C up to 70°C
Frequency60 hz
Current TypeAC

ARI ARMATUREN
CONTROL VALVE
ARI PREMIO

Supplier Ari Armaturen Premio

Ari Armaturen Control Valve

Electric Actuators Ari Paco

Actuating or shut-off valve are operated with the ARI-PACO linear actuators which have a linear nominal path of up to 20 mm and require a thrust force of 0,85 kN.

Ari Armaturen Features :
  • Handwheel
  • Enclosure IP 54
  • Travel indicator
  • Torque-dependent switching off
  • Require a thrust force of 0,85 kN
  • Operative ambient temp 0°C to +50°C
 Other Ari Armaturen :
TypePremio 12kN
Voltage115 V
Temperature Rating-20°C up to 70°C
Frequency60 hz
Current TypeAC

ARI ARMATUREN
CONTROL VALVE
ARI PREMIO

Supplier Ari Armaturen Premio

ARI ARMATUREN
CONTROL VALVE
ARI PACO

Supplier Ari Armaturen Paco

Ari Armaturen Control Valve

Electric Actuators Ari Paco

Actuating or shut-off valve are operated with the ARI-PACO linear actuators which have a linear nominal path of up to 20 mm and require a thrust force of 0,85 kN. The linear actuators are adjusted to the thrust forces denoted in the technical data.

Ari Armaturen Features :
  • Spare part drawings
  • Operating instructions
  • Settings with over pressure
  • pressure temperature diagram
Ari Armaturen Series :
TypePaco 0,85 D
Voltage24 V
Temperature Rating0°C up to 50°C
Frequency50/60 hz
Current TypeDC

Ari Armaturen Isolation

Ari Armaturen Isolation Valve

Ari Faba Supra C

The information complies to the Pressure Equipment Directive 2014/68/EU. It is the responsibility of the machine planner to ensure compliance. The special markings on the valve.

Ari Armaturen Features :
  • Seat stellited
  • Grooved gaskets
  • External stem thread
  • Plug with marginal seat
  • Bellows seal 10.000 load cycles
  • Guided plug, hardened / stellited
Other Ari Armaturen :
Figure35140...153
Pressure NominalPN 40
Nominal DiameterDN 65
Temperature-60°C up to 450°C
Material10619+N

ARI ARMATUREN
GLOBE VALVE
ARI FABA

Supplier Ari Armaturen Faba Supra - C

Ari Armaturen Isolation Valve

Ari Faba Supra C

The information complies to the Pressure Equipment Directive 2014/68/EU. It is the responsibility of the machine planner to ensure compliance. The special markings on the valve.

Ari Armaturen Features :
  • Seat stellited
  • Grooved gaskets
  • External stem thread
  • Plug with marginal seat
  • Bellows seal 10.000 load cycles
  • Guided plug, hardened / stellited
Other Ari Armaturen :
Figure35140...153
Pressure NominalPN 40
Nominal DiameterDN 65
Temperature-60°C up to 450°C
Material10619+N

ARI ARMATUREN
GLOBE VALVE
ARI FABA

Supplier Ari Armaturen Faba Supra - C

ARI ARMATUREN
BUTTERFLY
ARI ZIVA Z

Supplier Ari Armaturen Ziva-Z

Ari Armaturen Isolation Valve

Butterfly Valve Ari Ziva Z

Gear type (actuation by hand wheel, clockwise for closing). The CLOSE-position can be adjusted by 5° by a stop screw. The stop screws are self-sealing and self-locking.

Ari Armaturen Features :
  • Self-locking
  • Soft sealing
  • Maintenance-free
  • Nodular iron body
  • Stainless steel disc
  • Centrical disc bearing
Other Ari Armaturen :
Figure22014
Pressure NominalPN 16
Nominal DiameterDN 25/32
Temperature-10°C up to 80°C
MaterialEN-JS1030

Ari Armaturen Isolation Valve

Check Valve Ari Checko V/D

We recommend fitting a flow stabilizing pipe at least 2 m in length or between 10 x DN and DN200 in diameter between the pump and the first stop valve in the pump discharge.

Ari Armaturen Features :
  • Solid plug
  • Precise plug
  • Valve plate guidance
  • Re-setting spring made of stainless
  • Solid seat made of stainless material
  • Valve plate made of stainless material
Other Ari Armaturen :
Figure12771
Pressure NominalPN 16
Nominal DiameterDN 15
Temperature-10°C up to 300°C
MaterialEN-JL1040

ARI ARMATUREN
CHECK VALVE
ARI CHECKO

Supplier Ari Armaturen Checko

Ari Armaturen Isolation Valve

Check Valve Ari Checko V/D

We recommend fitting a flow stabilizing pipe at least 2 m in length or between 10 x DN and DN200 in diameter between the pump and the first stop valve in the pump discharge.

Ari Armaturen Features :
  • Solid plug
  • Precise plug
  • Valve plate guidance
  • Re-setting spring made of stainless
  • Solid seat made of stainless material
  • Valve plate made of stainless material
Other Ari Armaturen :
Figure12771
Pressure NominalPN 16
Nominal DiameterDN 15
Temperature-10°C up to 300°C
MaterialEN-JL1040

ARI ARMATUREN
CHECK VALVE
ARI CHECKO

Supplier Ari Armaturen Checko

ARI ARMATUREN
CONTROL VALVE
ARI STRAINER

Supplier Ari Armaturen Strainer

Ari Armaturen Isolation Valve

Ari-Strainer

The strainer screens must be cleaned regularly. Maintenance and maintenance-intervals have to be defined by the operator and depends on the degree of dirt accumulation in the system.

Ari Armaturen Features :
  • Screen from DN50 with reinforced ring
  • Screen from DN150 with supporting basket From Strainer
  • Catalog Precise guidance of screen in cover and body
Other Ari Armaturen :
Figure10050
Pressure NominalPN 6
Nominal DiameterDN 15
Temperature-10°C up to 300°C
MaterialEN-JL1040

Ari Armaturen Isolation Valve

Globe Valve Ari Euro Wedi

With a fully open valve relieves the back seat of the elastomer sealing system. From DN65 upwards, the lift limitation nut has to be removed and then the valve.

Ari Armaturen Features :
  • Free of PCB
  • Soft sealing
  • Maintenance-freez
  • External stem thread
  • Non-rising handwheel
  • Double sealing mechanism
Other Ari Armaturen :
Figure10070
Pressure NominalPN 6
Nominal DiameterDN 15
Temperature-10°C up to 120°C
MaterialEN-JL1040

ARI ARMATUREN
GLOBE VALVE
ARI EURO WEDI

Supplier Ari Armaturen Euro Wedi

Ari Armaturen Isolation Valve

Globe Valve Ari Euro Wedi

With a fully open valve relieves the back seat of the elastomer sealing system. From DN65 upwards, the lift limitation nut has to be removed and then the valve.

Ari Armaturen Features :
  • Free of PCB
  • Soft sealing
  • Maintenance-freez
  • External stem thread
  • Non-rising handwheel
  • Double sealing mechanism
Other Ari Armaturen :
Figure10070
Pressure NominalPN 6
Nominal DiameterDN 15
Temperature-10°C up to 120°C
MaterialEN-JL1040

ARI ARMATUREN
GLOBE VALVE
ARI EURO WEDI

Supplier Ari Armaturen Euro Wedi

Ari Armaturen Safety Valve

ARI ARMATUREN
SAFETY VALVE
ARI SAFE

Supplier Ari Armaturen Safe

Ari Armaturen Safety Valve

Safety Valve Ari-Safe

The information complies to the Pressure Equipment Directive 2014/68/EU. It is the responsibility of the machine planner to ensure compliance. The special markings on the valve must be taken into account.

Ari Armaturen Features :
  • Wear resistant seat/disc
  • Direct loaded with spring
  • Possible with soft seal disc
  • Possible with EPDM bellows
  • Precision disc alignment and guide
Other Ari Armaturen :
Figure12901
Pressure NominalPN 16
Nominal DiameterDN 15/25
Temperature-10°C up to 300°C
MaterialEN-JL1040

Ari Armaturen Safety Valve

Safety Valve Ari Safe-P

Safety valve are safety devices designed to prevent the pressure in any pressurised system from exceeding the maximum permissible pressure by more than the permissible tolerance.

Ari Armaturen Features :
  • Wear resistant seat/disc
  • Direct loaded with spring
  • Possible with soft seal disc
  • Possible with EPDM bellows
  • Precision disc alignment and guide
  • Possible with stainless steel bellows
Other Ari Armaturen :
Figure12921
Pressure NominalPN 16
Nominal DiameterDN 15
Temperature-10°C up to 300°C
MaterialEN-JL1040

ARI ARMATUREN
SAFETY VALVE
ARI SAFE-P

Supplier Ari Armaturen Safe P

Ari Armaturen Safety Valve

Safety Valve Ari Safe-P

Safety valve are safety devices designed to prevent the pressure in any pressurised system from exceeding the maximum permissible pressure by more than the permissible tolerance.

Ari Armaturen Features :
  • Wear resistant seat/disc
  • Direct loaded with spring
  • Possible with soft seal disc
  • Possible with EPDM bellows
  • Precision disc alignment and guide
  • Possible with stainless steel bellows
Other Ari Armaturen :
Figure12921
Pressure NominalPN 16
Nominal DiameterDN 15
Temperature-10°C up to 300°C
MaterialEN-JL1040

ARI ARMATUREN
SAFETY VALVE
ARI SAFE-P

Supplier Ari Armaturen Safe P

ARI ARMATUREN
SAFETY VALVE
ARI SAFE-TC

Supplier Ari Armaturen Safe TC

Ari Armaturen Safety Valve

Safety Valve Ari Safe-TC

Open safety valve (open bonnet / open cap) are not permissible for fluids, dusty atmospheres, open air use or for any Group 1 fluids in accordance with Pressure Equipment Directive.

Ari Armaturen Features :
  • Wear resistant seat/disc
  • Direct loaded with spring
  • Possible with soft seal disc
  • Possible with EPDM bellows
  • Precision disc alignment and guide
  • Possible with stainless steel bellows
Other Ari Armaturen :
Figure25941
Pressure NominalPN 40
Nominal DiameterG1" XG1 1/2"
Temperature-10°C up to 350°C
MaterialEN-JS1049

Ari Armaturen Safety Valve

Safety Valve Ari Safe-TCP

The valve are designed for standard operating conditions. If conditions exceed these requirements, e.g. aggressive or abrasive media, the operator should state the higher requirements when ordering.

Ari Armaturen Features :
  • Wear resistant seat/disc
  • Direct loaded with spring
  • Possible with soft seal disc
  • Possible with EPDM bellows
  • Precision disc alignment and guide
Other Ari Armaturen :
Figure57961
Pressure NominalPN 100
Nominal DiameterG1" XG1"
Temperature-60°C up to 300°C
Material14581

ARI ARMATUREN
SAFETY VALVE
ARI SAFE-TCP

Supplier Ari Armaturen Safe TCP

Ari Armaturen Safety Valve

Safety Valve Ari Safe-TCP

The valve are designed for standard operating conditions. If conditions exceed these requirements, e.g. aggressive or abrasive media, the operator should state the higher requirements when ordering.

Ari Armaturen Features :
  • Wear resistant seat/disc
  • Direct loaded with spring
  • Possible with soft seal disc
  • Possible with EPDM bellows
  • Precision disc alignment and guide
Other Ari Armaturen :
Figure57961
Pressure NominalPN 100
Nominal DiameterG1" XG1"
Temperature-60°C up to 300°C
Material14581

ARI ARMATUREN
SAFETY VALVE
ARI SAFE-TCP

Supplier Ari Armaturen Safe TCP

ARI ARMATUREN
SAFETY VALVE
ARI SAFE-SN

Supplier Ari Armaturen Ansi-SN

Ari Armaturen Safety Valve

Safety Valve Ari Safe-SN ANSI

At DN15-32: If valve should be mounted directly to valve, the upper flange connecting bolts should be preferably executed with studs and hexagon nuts on both sides.

Ari Armaturen Features :
  • Wear resistant seat/disc
  • Direct loaded with spring
  • Possible with soft seal disc
  • Possible with EPDM bellows
  • Precision disc alignment and guide
  • Possible with stainless steel bellows
Other Ari Armaturen :
Figure32901
Pressure NominalANSI 150
Nominal Diameter1 1/2" x2 1/2"
Temperature-60°C up to 450°C
MaterialSA216WCB

Ari Armaturen Steam Trapping

Ari Armaturen Steam Trapping

Steam Trap Ari Cona-M

The information complies to the Pressure Equipment Directive 2014/68/EU. It is the responsibility of the machine planner to ensure compliance. The special markings on the valve must be taken into account.

Ari Armaturen Features :
  • High sensitivity
  • Installation in any position
  • Exact control characteristic
  • Integrated non return protection
  • Optimized design for quick installation
Other Ari Armaturen :
Figure12610-1
Pressure Nominal16
Nominal Diameter25
Temperature-10°C up to 300°C
MaterialEN-JL1040

ARI ARMATUREN
STEAM TRAP
ARI CONA-M

Supplier Ari Armaturen-Cona M

Ari Armaturen Steam Trapping

Steam Trap Ari Cona-M

The information complies to the Pressure Equipment Directive 2014/68/EU. It is the responsibility of the machine planner to ensure compliance. The special markings on the valve must be taken into account.

Ari Armaturen Features :
  • High sensitivity
  • Installation in any position
  • Exact control characteristic
  • Integrated non return protection
  • Optimized design for quick installation
Other Ari Armaturen :
Figure12610-1
Pressure Nominal16
Nominal Diameter25
Temperature-10°C up to 300°C
MaterialEN-JL1040

ARI ARMATUREN
STEAM TRAP
ARI CONA-M

Supplier Ari Armaturen-Cona M

ARI ARMATUREN
STEAM TRAP
ARI CONA-TD

Supplier Ari Armaturen Cona TD

Ari Armaturen Steam Trapping

Steam Trap Cona-TD

In the event of malfunction or faulty operating performance check that the installation and adjustment work has been carried out and completed in accordance with these Operating Instructions properly.

Ari Armaturen Features :
  • Installation in any position
  • Replaceable controller-unit
  • Intermittent mode of operation
  • Integrated non return protection
  • Optimized design for quick installation
Other Ari Armaturen :
Figure45640-2
Pressure Nominal40
Nominal DiameterRp/BSP 1
Temperature-60°C up to 450°C
Material10460

Ari Armaturen Steam Trapping

Steam Trap Ari Cona All In One

At -20°C to +65°C, The paint is a base coat to protect against corrosion during transportation and storage. Do not damage paint protection, Back pressure-free condensate discharge.

Ari Armaturen Features :
  • Internal strainer
  • Integrated non return protection
  • Optimized design for quick installation
  • Gasket-free sealing of the screwed cap
  • Mounting position verical or horizontal
  • Back pressure-free condensate discharge
Other Ari Armaturen :
Figure4560A-1
Pressure Nominal40
Nominal Diameter15
Temperature-10°C up to 450°C
Material10460

ARI ARMATUREN
STEAM TRAP
CONA ALL IN ONE

Supplier Ari Armaturen Cona All In One

Ari Armaturen Steam Trapping

Steam Trap Ari Cona All In One

At -20°C to +65°C, The paint is a base coat to protect against corrosion during transportation and storage. Do not damage paint protection, Back pressure-free condensate discharge.

Ari Armaturen Features :
  • Internal strainer
  • Integrated non return protection
  • Optimized design for quick installation
  • Gasket-free sealing of the screwed cap
  • Mounting position verical or horizontal
  • Back pressure-free condensate discharge
Other Ari Armaturen :
Figure4560A-1
Pressure Nominal40
Nominal Diameter15
Temperature-10°C up to 450°C
Material10460

ARI ARMATUREN
STEAM TRAP
CONA ALL IN ONE

Supplier Ari Armaturen Cona All In One

ARI ARMATUREN
STEAM TRAP
CONA CONTROL

Supplier Ari Armaturen Cona Control

Ari Armaturen Steam Trap

Components and Accessories for Steam Range

Store the device in a dry, dirt-free location (temperature range: -40°C to +85°C. Don’t remove the electronics, valve or measuring amplifiers from the packaging.

Ari Armaturen Features :
  • Patent applied
  • Safe temperature sensor
  • With single operation with relay outputs
  • Continous monitoring of trap performance
Other Ari Armaturen :
Figure45685-1
Pressure Nominal40
Nominal Diameter15
Temperature-60°C up to 250°C
Material10460

Ari Armaturen Steam Trapping

Steam Trap Ari Cona-S

Condensate collection/steam distribution manifolds are used for the discharge/distribution/ collectioni of condensate, steam or hot water, Safety back seat when fully opened valve.

Ari Armaturen Features :
  • Ventile wartungsarm
  • Flexibility through compact
  • No need for manifold remova
  • Protection against energy loss
  • Economic on-site handling and long life
  • Safety back seat when fully opened valve
Other Ari Armaturen :
Figure12630-1
Pressure Nominal16
Nominal Diameter15
Temperature-10°C up to 300°C
MaterialEN-JL1040

ARI ARMATUREN
STEAM TRAP
ARI CONA-SC

Supplier Ari Armaturen Cona S

Ari Armaturen Steam Trapping

Steam Trap Ari Cona-S

Condensate collection/steam distribution manifolds are used for the discharge/distribution/ collectioni of condensate, steam or hot water, Safety back seat when fully opened valve.

Ari Armaturen Features :
  • Ventile wartungsarm
  • Flexibility through compact
  • No need for manifold remova
  • Protection against energy loss
  • Economic on-site handling and long life
  • Safety back seat when fully opened valve
Other Ari Armaturen :
Figure12630-1
Pressure Nominal16
Nominal Diameter15
Temperature-10°C up to 300°C
MaterialEN-JL1040

ARI ARMATUREN
STEAM TRAP
ARI CONA-SC

Supplier Ari Armaturen Cona S